Splashing Water DIORAMA with SCALERAMA diorama Materials
This is Splashing Water DIORAMA (scale 3 inch). you can make diorama easily with SCALERAMA. Don`t worry to make diorama.
It takes just 2 hours to finish diorama. Reference INTRODUCTION.

How To Make Large Scale Splashing Waves (Click Images, you can see High Quality Images)
                   
STEP1. Mix 200% Volume 1Hour Water Effect RESIN with 100% Volume            STEP2. Attach Model Figure on the Basement with Instant Glue. 
HARDNER. Mix during 1 Minute. and Coat Mixed Water Effect at The edge
of Picture Frame. Dry it  during 1 Hour or 2 Hours.
(This is Waterproof Process)
                    
STEP3. Make Large Scale Splashing Wave Frame. Use Clear PET bottle.              STEP4. Cut and Make a Frame shape with Scissors.
              
STEP5. Attach Frame with Instant Glue on your Basement.                                STEP6. Watch Frame Shape.
              
STEP3. Mix 200% Volume 1Hour Water Effect RESIN with 100% Volume            STEP4. Mix Splashing Water Effect 200% Volume RESIN with 100%
HARDNER and Insert Blue & Black Color Enamel Paint. and Pour Them.           Volume HARDNER and Insert Blue and Black Color Enamel Paint. 
Dry it  during 1 Hour or 2 Hours.                                                                      and Drop 2~3 Points Effector. (Effector is Brown Glass Bottle)
                                                                                                                        Mix During 3 Minutes and Coat them with Paint Brush.
                                                                                                                        (Clean Your Paint Brush with Lacquer Thinner after process)

STEP5. Use Sharp and Small Paint Brush to express Detail Splashing Waves.